Consultation

NS MINI jewelry laser welding machine -Manual

09/17/2024


Sharelaser,  CEO@sharelaser.com  SHARE LASER, Laser marking machine, laser welding machine, laser cleaning machine

1. Product instruction:

Jewelry laser welder is mainly used in perforating and spot welding of white gold, platinum, carbon steel. The spot welding process is thermal conduction, i.e. the laser radiation heats the surface of work piece, and the surface heat diffuses to the interior through thermal conduction and melts the work piece by controlling the width, energy, peak power and repeating frequency of laser pulse to form specific molten pool. 


2. Operation steps

2.1 Connect 220V

2.2 Add water

2.2.1 Connect the tube with Water In, put the tube in the distilled water. Do not add antifreeze for fear of corrosion. Add only distilled water. The temperature should not be lower than 0, as freezing inside will cause the water tank to burst.

2.2.2 Start machine, turn the key switch on, and turn right the Emergency stop.

2.2.3 Clickset, input password 66778899, then click ENTER. The machine will add water automatically.

After water level turn from low” to normal, it means water add fully.

2.3 If occur Water circulation anomalies, then restart machine, press stop, and turn right.

2.4 Press ON

2.5 Welding, connect the foot switch cable first.

2.5.1 Welding gold and silver: current 48, Frequency 10, pulse width 2.8, spot 0.1.

K gold, 925 silver can be directly welded, pure gold sterling silver should be painted with black pen, the reflection is small, the absorption energy is larger.

2.6 Change English to Korean/Arabic/Turkish language

Click set, input password 666666, choose what you need.

2.7 Shutdown steps

Click OFF, Click YES, then press Stop.

For more details, please check videos.

2.8 The water temperature can be at under 50, after more than 50, the machine will protect itself, no laser beam come out.


For more details, if need whole manual and working videos, please contact us.  Email: CEO@sharelaser.com